Page 10
WS 1.5 EI/2LEI Man u al
WS1.5” Drive Cap Assembly, Downfl ow Piston, Regenerant Piston, Spacer Stack Assembly,
Drive Back Plate, Main Body and Meter
Drawing No.
Order No.
Description
Quantity
1
V3004
WS1 DRIVE CAP ASY
1
2
V3135
O-RING 228
1
3
V3407
WS1.5 PISTON DOWNFLOW ASY
1
4
V3174*
WS1 REGENERANT PISTON
1
5
V3423
WS1.5 BACKPLATE DOWEL
1
6
V3430
WS1.5 SPACER STACK ASY
1
7
V3178
WS1 DRIVE BACK PLATE
1
8
V3419
O-RING 347
1
9
V3418
O-RING 328 FOR VALVE BODIES WITH NPT THREADS
1
V3441
O-RING 226 FOR VALVE BODIES WITH BSPT THREADS
Not Shown
V3437
WS1.5 FLOW STRAIGHTENER (LOCATED INSIDE METER HOUSING)
1
10
V3401-01
WS1.5 METER HOUSING
1
V3401BSPT-01
WS1.5 METER HOUSING BSPT
11
V3223
WS2 METER CLIP
1
12
V3003-02**
WS1.5/2L/2H Meter Commercial Asy
1
13
V3118-03
WS1.5/2 TURBINE ASY
1
14
V3105
O-RING 215
1
15
V3501
WS1.5/2 TURBINE CLIP
1
16
V3400-01
WS1.5 VALVE BODY DOWNFLOW
1
V3400BSPT-01
WS1.5 VALVE BODY DOWNFLOW BSPT
Not Shown
D1300
TOP BAFFLE DFSR CLACK 1.5/50MM
1
BSPT threads on inlet and outlet ports on the V3400BSPT-01 and V3401BSPT-01. NPT threads on drain and injector ports on V3400BSPT-01.
*V3174 WS1 Regenerant Piston not used for backwash only valves. V3010-15Z Injector Plug and V3195-01 WS1 Refi ll Port Plug ASY must be used for
backwash only valves.
**Order number V3003-02 includes V3118-03, V3501 and V3105.
If using a meter on WS1.5” valves, select 1.5 if valve software records in gallons and 38 if valve software records in cubic meters.
1
2
3
4
5
6
7
8
9
12
13
B or indent indicates BSPT
N or no mark indicates NPT
Install D1300 upper diffuser (not shown)
In 2007, a u-shaped retaining clip (V3501) was added to commercial meter assemblies to hold the turbine assembly in place. If V3501 is present, service or replace
the turbine by:
1. Removing bend from the two exposed tips of the retaining clip and remove clip.
2. Service or replace the V3118-03 WS1.5/2 Turbine Assembly and place back on the turbine shaft.
3. Insert the V3501 WS1.5/2 Turbine Clip and rebend the exposed tips.
The V3118-03 has a groove to line up with the V3501 WS1.5/2 Turbine Clip. If the meter assembly does not have two holes in the bottom to insert the clip, use a
V3118-01 Turbine Assembly or replace the entire meter.
15
14
10
16
Notch marks appear on hex
if BSPT threads
11
