- FRAME INSTALL GUIDE -
(2013-08-28)
14/20
All FRAME VANITIES must be wall-mounted with the custom mounting clips provided with
the furniture.
ATTENTION:
Vanity is to be hung onto the provided mounting clips.
1.
Align and level the mounting clips according to horizontally reinforced studs and
desired Vanity height.
2.
Space mounting clips evenly along width of cabinet.
3.
Install mounting clips to the wall using 3" long #10 wood screws. Fasten securely.
4.
Remove Vanity drawers and cover glides with masking tape to protect them
from dust.
5.
Position temporarily the Vanity onto mounting clips.
6.
Fasten down the Vanity to the wall by adding security tie-down, 3" long #10
wood screw along Top & Bottom anchoring lines (as depicted above) at
depicted hole locations.
Level
Drawer Insertion and Removal
Insertion
Removal
NOTE (Number of clips per model)
FRM18WM, FRM20WM,
FRM24WM, FRM30WM,
FRM36WM, FRS24WM, FRS36WM: 2 clips
FRS48WM, FRS60WM:
3 clips
FRS72WM:
4 clips
clips
Final anchoring
along back
extrusions
