WET SOUNDS
UNIVERSAL BLUETOOTH RECEIVER/ADAPTER
INSTALLATION/BLUETOOTH PAIRING INSTRUCTIONS:
STEP 1:
Connect the WW-BT-UR as explained in this manual. The BLUE light will
light when power is applied.
STEP 2:
If not already paired with another learned device, the BT-UR will
automatically enter pairing mode, which is indicated by the flashing BLUE light.
STEP 3:
From your phone’s Bluetooth pairing menu find the WW-BT-UR and connect
to it.
STEP 4:
When the Blue light is lit constantly, the BT-UR is paired to the BT device.
The WW-BT-UR will automatically default to this device if in range whenever the WW-
BT-UR is powered on.
STEP 5:
If using the BT-UR to power on an amplifier, when the BT device is paired &
playing music, the RED light will light to indicate that the BT-UR is sup12V to
the REMOTE OUT (Blue) wire. If music on the BT device is in PAUSE mode for more
than 10-20 seconds, the REMOTE OUT (Blue) wire loses +12V, causing the amplifier
to shut off. The RED light will also go out. Pressing PLAY again will re-12V to
the REMOTE OUT (Blue) wire, allowing the amplifier to power on again. The RED light
will light up.
This is to reduce battery draw caused by an amplifier being powered on while music is
in PAUSE mode.
MOUNTING INSTRUCTIONS:
The WW-BT-UR has no controls that need to be adjusted after installation, & emits
virtually no heat, so it may be mounted in a hidden or inaccessible location. The light
weight makes it easy to install with double stick tape or with wire ties using the side
tabs. It may be helpful to install in a place where viewing the LED indicator lights is
possible.
LIMITED WARRANTY:
What This Warranty Covers
This is a “limited” warranty. This warranty covers any defect in materials and
workmanship. This warranty only covers the original purchaser and is not
transferrable. This warranty is also only valid if the original purchase was made from
an authorized Wet Sounds
TM
dealer.
How Long Coverage Lasts
This warranty extends for 2 years from the date of purchase. It is recommended to
REGISTER your warranty online within 45 days of purchase at www.wetsounds.com –
click on “warranty registration”.
What Is Not Covered
This warranty does not cover fading or discoloration caused by exposure to sunlight
or chemicals such as ammonia, household bleach, or any cleaning material that
contains abrasive substances. Wet Sounds, Inc. does not cover the expense for
removal or reinstallation. Additionally, shipping TO Wet Sounds, Inc. must be paid for
by the purchaser. This warranty is void and inapplicable is Wet Sounds deems that
the product was abused or misused; including but not limited to damage caused by
accident, mishandling, improper installation, removing the inline fuse on the power
connection, negligence, normal; wear and tear, excessive water or heat damage,
freight/shipping damage, or products that have been disassembled by anyone other
than Wet Sounds technical staff. Wet Sounds will not be responsible for any incidental
or consequential damages, except to the extent provided (or prohibited) by applicable
law. This warranty gives you specific rights, and you may also have other rights which
vary from state to state.
THANK YOU FOR CHOOSING WET SOUNDS
FOR YOUR HIGH PERFORMANCE AUDIO SYSTEM!
The WW-BT-UR is an easy to operate Bluetooth
Receiver/Adapter.
With no controls on the unit itself, the BT-UR receives
the signal from any BT enabled device and sends to any
amplifier with low level inputs or a head unit with an
AUX input.
WIRING INSTALLATION INSTRUCTIONS:
RED WIRE
Connect to +12V for Power. A sw12V circuit is suggested.
BLUE WIRE
Connect to Amplifier Remote Wire. To turn on amp when the BT-UR
is paired to a BT device.
BLACK WIRE
Connect to -12V for Ground
MAIN OUTPUT
Connect to input of an amplifier or a head unit – This connection is
a 3.5mm. It will be necessary to use a 3.5mm/RCA adaptor such
as the Wet Sounds WW-RCA-3.5mm 2 ft when connecting to an
amplifier with RCA style inputs.
