6
Wet Sounds WS-MC1 Media Center System Owner’s Manual
WS-MC-1 Basic Controls
LIGHTING
Allows access to each lighting zone. The options are:
RENAME
Allows a customized label (8 characters max) to be applied to each
zone. To change the characters, rotate the MCK until the desired letter or
number is displayed, then press the MCK to move to the next character and
repeat the process. Once the zone label is changed, press the MCK repeatedly
until all 8 characters have been changed (a blank space is available). Once the
zone is renamed, the MC-1 will confirm the action via the display. All zones are
capable of being renamed with a custom label.
ENABLE/DISABLE
When a zone is disabled, it will no longer appear on the screen.
BLUETOOTH
®
Displays a list of Bluetooth
®
devices available for connection to the
MC-1. To connect, disconnect, or delete a displayed device, rotate the MCK until
the desired device is highlighted, then choose Connect, Disconnect, or Delete
using the buttons (
6
) below the display. Make sure the Bluetooth
®
on the device is
enabled (through the device’s settings). The MC-1 will confirm the action via
the display.
LEVEL ADJUST
Allows individual volume level adjustment of the Bluetooth
®
audio and the auxiliary inputs. Ideally all input sources in a system are the same
volume level, but if not this adjustment might be needed if the output level of the
Bluetooth
®
audio or the auxiliary sources are louder than the other sources.
LABEL PRESETS
Allows the 3 shortcut keys to have customized labels applied (up to
8 characters).
SHORTCUT KEYS
Allows any source to be assigned to the 3 shortcut keys. Once in
the shortcut key mode, use the MCK to select from the available sources, then use
the buttons below the display to assign the sources to SC1, SC2, or SC3. After the
shortcut keys are set up, pressing these buttons will select the source set to that key.
LCD BRIGHTNESS
Allows adjustment of the brightness of the display. Adjustment is
made by either rotating the MCK, or using the buttons (
6
) below the display.
CLOCK
Making this selection allows the clock to be set. Adjustment is made by
either rotating the MCK, or using the buttons below the display.
DAY NIGHT MODE
Allows the ability to scroll through the display options of DAY
(white screen/black characters) NIGHT (black screen/ white characters) or AUTO.
In AUTO mode, the display is in DAY mode until the vessel’s lights are turned on,
then the display goes into NIGHT mode. PLEASE NOTE: In order for the AUTO
function to operate properly, the
ORANGE
wire in the MC-BB harness labeled DIM
INPUT must be wired to a circuit in the vessel that gets +12V whenever the main
lighting switch is turned on.
