Mounting Instructions:
Wiring Instructions:
1.
Find the mounting location and determine which configuration to install the
provided L-Bracket. Please reference pages 5-6 for the different configurations.
Fasten the L-Bracket to the soundbar loosely.
If installing on a gas vehicle:
If installing on a electric vehicle:
1. Carefully remove the Positive (+) then Negative (-) battery wires.
2. Carefully remove the Positive (+) then Negative (-) battery wires.
1. Switch the electric vehicle into Tow Mode under the seat.
*If using a 16V or higher battery system, a DC-DC converter is required.
2.
Hold the L-Bracket in place on the soundbar when using configuration A or B.
Take an M8 x 45mm bolt (25mm if not using a spacer) using a flat washer and
lock washer and loosely fasten the L-Bracket to the soundbar. When mounting
in configuration C or D, do not use a flat washer when fastening the L-Bracket
to the soundbar. We recommend using threadlocker on these bolts.
2. Connect the Negative (Black) wire to the Negative (-) battery terminal and the
Positive (
Red
) wire to the Positive (+) battery terminal.
3. Connect the Negative (Black) wire to the Negative (-) terminal and the Positive
(
Red
) wire to the Positive (+) terminal on the DC-DC converter.
3. Ensure the soundbar is in the desired location, then use the additional M8 x
45mm bolt and tighten it in place using the hex-nuts provided. We recommend
using threadlocker on these bolts.
4. Route the
blue
AUX Input cable to a desired location.
5. Route the
blue
AUX Input cable to a desired location.
5.
Optional:
Route and connect the
blue
Remote Wire and the
blue
Signal
Output cable to an additional amplifier or Stealth AS subwoofer.
6.
Optional:
Route and connect the
blue
Remote Wire and the
blue
Signal
Output cable to an additional amplifier or Stealth AS subwoofer.
4. Adjust the soundbar in the proper orientation and tighten it in the desired
position.
3. Reinstall the Positive (+) then Negative (-) battery wires.
4. Reinstall the Positive (+) then Negative (-) battery wires.
7. Switch back into Run Mode.
Installation Specifications
Wet Sounds Stealth XT Soundbar Owner’s Manual
7
