Westward Hydraulic
Engine Cranes
Operating Instructions & Parts Manual
3ZC71H, 3ZC72K and 5Z010G
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions
for future reference.
®
Description
Westward hydraulic engine cranes are for lifting, lowering, and relocating loads to suitable support devices such as an engine stand.
Power Units are equipped with built-in pressure overload bypass and metered release valve enabling the operator to lower the boom
at a controlled rate of speed. Applications include removal and installation of automotive and light truck engines and assemblies.
Cranes can be knocked down for storage or relocation and reassembled. 3ZC72K features space saver design for compact storage.
These cranes are designed to meet applicable ANSI/PALD Standards.
Specifications
Ext. Boom
Hook Height
Model
Lock Position*
Capacity
Min.
Max.
Boom Length
3ZC71H P1
2 Ton
18
3
/
8
"
69-
1
/
4
"
48-
3
/
4
"
P2
1-
1
/
2
Ton
14"
75"
57-
3
/
4
"
P3
1 Ton
9-
1
/
4
"
81"
66-
3
/
4
"
P4
1
/
2
5"
86-
1
/
2
"
76-
3
/
4
"
3ZC72K P1
1 Ton
12"
85-
3
/
8
"
47"
P2
3
/
4
Ton
6-
1
/
4
"
87-
3
/
4
"
53"
P3
1
/
2
Ton
3
/
4
"
90-
1
/
2
"
59"
5Z010G P1
3
/
4
Ton
9-
5
/
8
"
78-
1
/
8
"
38-
1
/
8
"
P2
1
/
2
Ton
5-
7
/
8
"
80-
3
/
4
"
42-
1
/
8
"
P3
1
/
4
Ton
2"
83-
1
/
2
"
46-
1
/
2
"
NOTE:
Lift capacity diminishes as boom length is extended.
(*) Various boom lock positions are indicated on the boom extension.
General Safety Information
Before using this product read,
understand, and follow all printed
materials provided with, and on this device. This crane is
designed for lifting and lowering automotive and light truck
engines and assemblies only. Do not use as a load support
device. Immediately transfer the load to appropriately rated
support device such as an engine stand or work bench
capable of supporting rated capacity loads.
Do not exceed rated capacity. Use only on a hard, level
surface. For model 3ZC71H, never extend boom extension
beyond leg extension. Before moving, lower the load to the
lowest possible point. Use only slings or chains with a rated
capacity equal to or greater than that of the shop crane. Do
not allow load to swing or drop violently while moving or
lowering. No alterations shall be made to this product. Use
only those adapters and accessories provided by the crane
manufacturer. Never work on, under, or around a load
supported by this device. Failure to heed these warnings
may result in personal injury and/or property damage.
NOTE:
When removing an engine from a vehicle, ensure that the
front of the vehicle is not jammed up against any part of the crane.
SHI 001
Printed in China
02/10
Boom
Boom Extension
Hook
Front Extension Leg
Base Frame
Hydraulic
Unit
Rear Estension Leg
handle
Post
Struts
Caster
Figure 1 — Typical Engine Crane Components (3ZC71H shown)
