Westport WEST ADR 80/02, User Manual

Page: 77 / 91

9.1. FAULT CODES
9.1.2 Fault Display
When accessing the Fault Codes option in the Service menu, a fault code
display pane (Fig. 9.4) will be opened.
NOTE: Only faults from connected controllers will be displayed
Figure 9.4: Fault Code Display Pane
1 Status Indicates whether the fault code is active or inactive.
Note When there are no active or inactive fault codes to display, WEST
will display a ”No Fault Code” message. (Fig. 9.5).
2 Count Displays the number of times the fault has occurred. The maximum
number of counts is 126. When the number of counts exceeds 126, it
will no longer increment. However, the last time the fault occurred
will continue to be updated.
3 First Displays the engine hour at which the fault was detected for the
first time.
WEST User Manual 65