background image

Asse

m

bly lnstructions

Care and Maintenance

8

If the heater is not to be used for an extended period of time, it can be stored away. Make 

sure the power is turned off and the cord is unplu

gg

ed from the outlet. Wrap the cord 

around the handle  on the rear of the portable heater. Cover the heater to prevent dust from 

accumulatin

g

 on the heater. 

Y

ou may want to repack it back in its ori

g

inal carton. Always 

store the heater in a dry and dust free environment. (NOTE: 

Y

ou may want to clean the filter 

prior to storin

g

 the heater so that it is ready for operation the next time it is put in use.) 

Maintenance

Before care or maintenance is applied, always unplu

g

 the cord from the electrical outlet. The 

cabinet housin

g

 can be wiped down with furniture polish. The heater has a washable filter. 

The filter should be cleaned re

g

ularly to provide for maximum performance. Once the filter 

is removed, run warm water throu

g

h and over the filter to remove dirt and dust. Shake all 

water residue from the filter and replace it back in the heater. (NOTE: A mild soap can be

applied to assist in removin

g

 dirt and dust from the filter)

Install the cord wrap on the back of the heater as illustrated, fixin

g

 it by 2 tappin

g

 screws.

Cord wrap

Tappin

g

 screw

Summary of Contents for 138807












Reviews: