7
Electrical connection of your hob
.
Before proceeding with the electrical connection, verify that the current carrying
capacity of the system and the socket is adequate for the maximum power rating
of the hob.
·
Electrical installation of the residence and the electrical current plug in use
must be earthed and conform with safety regulations.
·
If there is no dedicated hob circuit and fused switch, they must be installed by
a qualified electrician before the hob is connected.
·
Fused switch must be easily accessible once the hob has been installed.
·
Do not use adaptors, multiple sockets and/or extension leads.
·
This appliance conforms with the requirements ofthe following EEC Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to
radio interference,
2. EEC/89/109 relating to contact with foods.
·
A circuit breaker with a contact opening of at least 3 mm, rated 20 A and
delayed functioning type must be installed inside the supply circuit.
