If your bimini is missing
any of these parts,
please contact the
retailer or dealer from
whom you purchased
the bimini before
proceeding with the
installation.
Package Contents
Washer (4)
#8 5/8” screw
(24)
Hardware Kit
Hold down
strap (4)
Strap Kit
Tools Required
*
Phillips and Flat Head Screwdrivers
*
Drill and 9/64” Drill Bit
(2)
(2)
Bow Pieces
Bow 1
(2)
Bow 2
Bow Center
Swivel mount
(2)
Strap eyes
(4)
Important!
Each bow part is labeled
with the bow number -1,
-2, etc. Organize bow
pieces by grouping together
all -1s, all -2s, etc.
2-Bow Aluminum Bimini Assembly Instructions
. . . and inserting 5/8” screws as
shown.
Repeat steps 1 and 2 for remaining bow.
2
Assemble pieces of Bow 1 by
attaching both Bow 1 sides to
1
Line up 2 holes on both sides
and install screws.
Jaw
Slide
s
Eye E
nds
Rear Label
3
Lay bimini fabric face down on
a flat clean surface (label on rear
sleeve will be facing up)
4
Position Bow 1 as shown with
jaw slides facing up. Thread Bow 1
through rear sleeve and bow strap
loops.
assembly
Position Bow 2 as shown with holes
facing up. Thread Bow 2 through front
sleeve of fabric.
5