Westlab FXP12M Operating Manual Download Page 6

 

 

 

 

 

 

 

5

 

14. WARRANTY STATEMENT:

The MANUFACTURER of this machine, WESTLAB 

AUSTRALIA PTY. LTD., warrants it to be free from defects 

in material and workmanship under normal use

and service and the purchaser shall be entitled 

to the following consideration:

15. WARNING:

UNAUTHORIZED MODIFICATIONS AND/OR REPAIRS 

WILL VOID WARRANTY.

Only a full authorized service person should attempt to service 

this product. The circuits present high-level voltage. Improper 

testing or repair procedures could result in injury to the service 

person and damage to the product.

If any part or parts of the cleaner prove defective within 

twelve months of the date of installation, in the original 

purchasers’ premises, the defective part or parts will be 

repaired or replaced free of charge. The cost of 

transportation both ways of the part or parts or even 

the unit itself, to the premises of the MANUFACTURER 

is to be paid by the claimant.

The MANUFACTURER will not be liable for any loss, 

damage or expense caused directly or indirectly by 

any fault developing in this machine or its accessories.
This WARRANTY applies only to installations within the 

Commonwealth of Australia and its Territories. Removal of the 

original serial numbers voids this WARRANTY in its entirety.
The MANUFACTURES decision shall be final and binding 

in respect to any claim or dispute arising out of a defect in 

any machine parts.
The MANUFACTURER recognises no other WARRANTY, 

expressed or implied by others.

At the discretion of the MANUFACTURER, this warranty 

shall not apply to: -

(a) Parts of proprietary manufacture supplied 

or incorporated in this machine, which are covered 

by their manufactures separate guarantee.

(b) Parts made defective through accident, incorrect 

voltage or current characteristics, alteration misuse, 

neglect or wear and tear.

order and delivery details at the end 

of the day.

ONLINE

www.westlab.com.au

Order online with our easy Express 

Order form for fast, secure ordering.

PHONE

1800 358 101

Speak to one of our 

friendly, efficient staff 

from 8.00am to 5.00pm Monday to 

Friday.

EMAIL

[email protected]

24 hours, 7 days a week convenience.

FAX

1300 725 903

Order via fax and we will confirm your 

ORDERING WITH 
WESTLAB IS EASY...

WESTLAB
FXP12M
OPERATING

MANUAL

Summary of Contents for FXP12M







Reviews: