3
PRODUCT MANUAL
1800 358 101
www.westlab.com.au
+64 9 553 3677
www.westlab.co.nz
646 568 5391
www.westlab.com
1 877 822 1455
www.westlab.com
Australia
New Zealand
United States
Canada
Removable Plate
Yes
Noise Level
Noiseless operation
Loading Capacity [max.]
1kg
Protection Class
IP 21
Dimensions
190mm W x 135mm D x 133mm H
3. Safety Precautions
•
Never use the instrument in any manner not specified in this manual.
•
Equipment used in any manner not specified in this manual or by the manufacturer
might result in the lapse of warranty.
•
Do not try to stop the roller by blocking or holding it.
•
Never move the instrument while the equipment is under operation.
•
Repairs must only be performed by authorised service technician.
•
Only use recommended original spare parts for best result and product safety.
•
If liquids are spilled on the roller, the instrument must be cleaned carefully and
properly before being used again.
•
Prior to mixing, the tubes should be visually inspected for material damage.
Damaged tubes must not be used as this can result in sample loss and the
contamination of the product.
•
The maximum capacity of 1kg must not be exceeded.
•
This product must be used for specified applications only. It must not be operated
in a hazardous or flammable environment and must not be used to mix explosive
or highly reactive substances.
•
Do not place the potential hazardous material within the clearance area or envelope.
•
Wear your personal protective equipment in accordance with the hazards category
of the medium to be processed. There is risk of liquid splashing.
•
Place the instrument on a flat, levelled, and solid surface. Make sure the feet of the
instrument are clean and undam¬aged.
•
Do not move the instrument while it is operating or con¬nected to the main power supply.
•
Ensure that only closed tubes are used for mixing and roll¬ing.
•
Do not lean on the equipment. It may damage the equipment or harm the operator.
•
Do not fill tubes near the device. Liquid spillage may harm the device.
•
In the event of contamination caused by aggressive agents, the device must be
cleaned immediately using a natural cleaning liquid. If any damage is seen, contact
the service technician.
•
The power adaptor given with the unit is designed to be used for this unit. Do not use
any other power adaptor.
•
Only process media which will not react dangerously to the extra energy produced
by mixing.
•
Do not operate the appliance in explosive atmosphere with hazardous substance or
under water.
