3
PRODUCT MANUAL
1800 358 101
www.westlab.com.au
+64 9 553 3677
www.westlab.co.nz
646 568 5391
www.westlab.com
1 877 822 1455
www.westlab.com
Australia
New Zealand
United States
Canada
3. Safety Precautions
•
The improper use of the unit can result in accidents and electric discharges, circuit
breakers, fires, and other damages.
•
Ensure that the balance is protected from any sudden movements or knocks, as
well as direct sunlight or air flows.
•
The balance is supplied with an adapter that is required to be plugged to an earth
connection. The socket should be ready to unplug the unit in case of an emergency.
•
Do not unplug the adapter by pulling the wire. Always unplug it from the base.
•
Do not use the balance in a wedged location such as a shelf.
•
Do not use sharp objects such as pens to press the buttons of the control panel.
Only use your fingers.
•
To prevent damage to the sensor, do not place an object on the pan that is heavier
than the maximum capacity of the balance.
•
Do not submerge the balance or spill liquids on it.
•
When the balance is in use for extended periods of time, lock the rechargeable
battery.
•
If any liquid contacts the electric parts of the balance, immediately disconnect the
unit and send it to an approved service technician.
•
Always use the original components and supplies. Other devices and components
may be similar, but they can damage the unit.
4. Maintenance & Cleaning
•
Do not use scourers or substances that can grate for cleaning the metallic parts
such as the stainless steel, aluminium, coatings etc on the balance. Note they can
damage and result in the early aging of the unit.
•
Use a fluff free cloth dampened with soaped water to clean the unit. Ensure that the
soaped water does not contain abrasives.
ATTENTION!
If the balances are not properly cleaned and disinfected, they will not be
repaired by our service team.
