Condition the oven
(to burn off any residue)
New appliances can have oil or residue left
from manufacturing. You will need to heat
your oven for 30 minutes before using it for
the first time.
1. Turn the function selector dial to
FAN FORCED
2. Using the temperature selector, set
the oven at 180°C for approximately 30
minutes. Please ensure that the room is
well ventilated during this process.
Set the time
You must set the time before you can operate
your appliance.
1. After the appliance has been electrically
connected, ‘12:00’ will be displayed and the
clock icon will flash
2. Press + or - symbols/buttons to set the time
of day
NOTE: The clock has a 24 hour display.
655
645
636
617
625
616
615
614
613SC
665
P615
P617
P618
P627
FUNCTION
TEMP
Hold 3s
BACK
FAVOURITE
SET TIME
ALARM
OK
ON/OFF
16:30
00:15
140°C
4. Fit shelf/tray (where
supplied) to telescopic slides
1. Push the shelf or tray along
the top of the slide until it hits
the back post.
Shelf
Back post
2. Drop the front of the shelf or
tray onto the slide ensuring it
sits behind the front post of the
slide.
Shelf
Front post
3. When fully inserted the shelf/
tray should not interfere with the
closed
oven door.
3. To fit a shelf or tray to side racks:
1. Locate the rear edge of the shelf
in between guide rails of the
side rack. Ensure the same rail
positions on both sides of the
oven are being engaged.
2. With the front edge raised, slide
the shelf into the oven.
3. Once the detents have passed the
front edge of the side rack, the
shelf can be pushed completely in.
Detent
Installing the oven accessories
1. Install telescopic slides (where supplied) to the
side racks. Refer to installation guide supplied
with oven slides.
2. Insert side racks
There is a left hand and right hand version (see
image for details).
1. Insert the rear peg into the rear access hole
provided,ensuring that the peg is fully inserted.
2. Then locate the front peg into the front access
hole and push in firmly.
Set...
Left hand side rack
front peg
rear peg
