background image

Page 9

CARE AND CLEANING

CLEANING AND MAINTENANCE 

Warning:

   To avoid electric shock always unplug your product before cleaning. 

Ignoring this warning may result in death or injury.

Caution:

 

 Before using cleaning products, always read and follow manufacturer’s 
instructions and warnings to avoid personal injury or product damage.

General:

 

•  Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed 

with warm water. Use sponge or soft cloth, dampened with the cleaning 
solution to wipe down your product.

 

• Rinse with clean warm water and dry with a soft cloth.

 

•  Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, 

concentrate detergents, solvents or metal scouring pads. SOME of these 
chemicals may dissolve, damage and / or discolor your product.

Power Interruptions

Occasionally there may be power interruptions due to thunderstorms or other 
causes. Remove the power cord from AC outlet when a power outage occurs. When 
power has been restored, replug power cord to AC outlet.

Vacation and Moving Care

For long vacations or absences, unplug the product, empty contents from product 
and clean the product and door gaskets according to “General Cleaning” section. 
Prop doors open, so air can circulate inside. When moving always move the product 
vertically. Do not move the product lying on its side.

Summary of Contents for WT2201 SERIES













Reviews: