18
EN
CLEANING AND CARE
4. Use a solution of 1 part vinegar to 3 parts water to clean the
mist nozzle and water tank. Clean the ceramic surface of the
oscillator in the base with a soft toothbrush. Make sure you
remove any scale.
MAX
MAX
Water
(3 Parts)
Distilled
Vinegar
(1 Part)
Alternatively, a citric acid (5-10g in 12 oz water) can be used to
clean these parts. Leave the solution in the water tank for
10-15 minutes.
5. Rinse the items thoroughly. Using a clean cloth, wipe any
deposits and excess water from the parts and dry thoroughly.
6. Reassemble the humidifier.
NOTE:
Clean the water tank, water tank cover and mist nozzle
with vinegar or citric acid once a week.
REPLACING THE FILTER
1. Remove the mist nozzle and then take off the water tank cover.
2. Lift the filter out of the water tank.
3. Place the new filter into the bottom of the water tank and then
put the water tank cover and mist nozzle back onto the water
tank.
WSHUJ2258C_AIR STERILIZATION_CA_2L_V2.indd 18
WSHUJ2258C_AIR STERILIZATION_CA_2L_V2.indd 18
22/6/2021 12:26:01 pm
22/6/2021 12:26:01 pm
