9
EN
OPERATING INSTRUCTIONS
18” High Velocity Fan
1. Place the metal fan on a flat, dry and stable surface.
2. Make sure the rotary switch knob (7) is at the “0” (OFF)
position.
3. Connect the power cord to a 120 V/AC / 60 Hz wall outlet.
4. Adjust the metal fan vertically to the desired angle.
5. Adjust the metal fan speed by turning the rotary switch knob
(7) to the “1” (Low), “2” (Medium) or “3” (High) position.
6. Turn off the metal fan by switching the rotary switch knob (7)
to the “0” (OFF) position.
7. Unplug the power cord from the wall outlet when the fan is not
in use.
USB Desk Fan
1. Unwind the USB cable (19) attached to the personal fan.
2. Connect the personal fan to the power supply. You can do this
in two ways:
- Insert one end of the supplied USB cable (19) into a USB port
on your computer, or
- Insert one end of the supplied USB cable (19) into the
supplied power adapter, and then plug the power adapter
into a 120 V/AC / 60 Hz wall outlet.
3. To turn on the personal fan, switch the
ON/OFF button
(18) to
I
. To turn off the personal fan, switch the
ON/OFF button
(18)
to
O
and disconnect the power adapter from the power supply.
HOW TO USE
WCFNCP001BK_18 HV Fan with Bonus Desk Fan_2L.indd 9
5/12/2019 18:00:07