• Do not leave lit gas burners exposed due to the risk of fire.
(Fig 2)
• The hood must always be disconnected from the electricity
supply before beginning any maintenance work.
• Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
Fig. 1
Fig. 2
Electrical connection
Check that the mains voltage matches with the voltage on
the data plate inside the canopy rangehood. Check that the
installation complies with standards of local building, gas and
electrical authorities. Before connecting to the mains supply
ensure that the mains voltage corresponds to the voltage on
the rating plate inside the cooker hood.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified person
in order to avoid a hazard.
Safety warnings – for the installer
When installing the cooker hood, make sure you adhere to the
minimum and maximum distances from the cooker hood base
to the hob surface. (Refer to Installation manual).
Exhaust flue installation: The following rules must be strictly
followed to obtain optimal air extraction.
5