Westinghouse Outdoor Power Equipment, LLC | 17
MAINTENANCE
NOTICE
Do not pollute. Follow the guidelines of the EPA or other
governmental agencies for proper disposal of hazardous
materials. Consult local authorities or reclamation facility.
SPARK PLUG MAINTENANCE
Inspect and clean the spark plug after every 100 hours of
use or six months. Replace the spark plug after 300 hours
of use or every year.
1.
Place the pressure washer on a level surface and allow
the engine to cool.
2.
Remove the spark plug boot by firmly pulling the spark
boot directly away from the engine.
3.
Clean the area around the spark plug.
4.
Remove the spark plug with the included spark plug
socket wrench.
NOTICE
Never apply any side load or move the spark plug
laterally when removing the spark plug.
5.
Inspect the spark plug. Replace if electrodes are
pitted, burned, or the insulator is cracked. Only use a
recommended replacement plug.
Recommended Spark Plug Replacement
Westinghouse
Model Number
Torch
NGK
Champion
Autolite
WPX3400
F7TC
BP7ES
332
62
6.
Measure the spark plug electrode gap with a wire-type
feeler gauge. If necessary, correct the gap by carefully
bending the side electrode.
Spark plug gap:
0.024 – 0.032 in. (0.60 – 0.80 mm)
7.
Carefully install the spark plug finger tight, then tighten
as additional 3/8 to 1/2 turn with the spark plug wrench.
8.
Attach the spark plug boot.
SPARK ARRESTOR SERVICE
Allow the muffler to cool completely before servicing the
spark arrestor. Check and clean the spark arrestor after
every 100 hours of use or every season. Failure to clean the
spark arrestor will result in degraded engine performance.
1.
Place the pressure washer on a level surface.
2.
Carefully remove the carbon deposits from the spark
arrestor screen with a wire brush. The spark arrestor
must be free of breaks and tears. Replace the spark
arrestor if damaged.
