Page 8
SETTING THE AUTO SHUTOFF TIMER FUNCTION
The Auto Shutoff Function allows for the heater to automatically power off
after a certain set time.
NOTE:
Timer can only be set while heater is on.Turn the heater on and press
the Timer button on the heater’s control panel or the remote control.
The digital display changes from the “temperature”
to the “hours” option for the timer. Continue to
press the timer button to change the number
of hours you would like the heater to run before
powering itself off .The hour options for the timer are from 0 to 12 hrs. in one hour
increments.
The selected hour increments will flash for a few seconds then revert back to the set
desired temperature. The timer indicator light will remain lit as long as the timer is set.
The heater will power off when the internal heater clock counts down to the amount
of auto shutoff time selected.
SETTING THE AUTO ON FUNCTION
The Auto On Function allows for the heater to power on automatically after a
certain set time.
NOTE:
Time can only be set while the heater is off.Turn the heater to the off
position and press the Timer button on the heater’s control
panel or
the remote control.
The digital display shows the “hours” option for the
timer. Continue to press the timer button to change
the number of hours you would like the heater’s
internal clock to count down before powering itself
on .The hour options for the timer are from 0 to 12 hrs. in one hour increments.
The Timer indicator light will remain lit as long as the timer is set. The heater will
power itself ON when the internal heater clock counts to the amount of auto on time
selected.
SETTING SWING/OSCILLATION FUNCTION
Select this function mode by pushing the OSCILLATE button on control panel
or remote control.
When the heater is on and oscillating function is working indicator will light.
Press the OSCILLATE button again to shut off and indicator light will turn off.
SETTING CHILD LOCK FUNCTION
The Child Lock can help avoid the heater from being accidentally engaged by
children. The locking mechanism can be set in both the ON and OFF modes.
Press TEMP+ and TEMP- buttons on the heater control panel
at the same time for 3 seconds. Locking is complete when you
hear a beep. When locked, the functions of the control panel
and remote control cannot be used.
When you need to unlock it, press TEMP+ and TEMP- buttons on the heater control
panel at the same time for 3 seconds. You will hear a beep .The control panel and
remote control will become functional again.
NOTE:
Child Lock function can not be activated from the remote control.
SET UP & USE
OSCILLATE
TIMER
TEMP +
TEMP -
POWER
MODE
OSCILLATE
TIMER
TEMP +
TEMP -
POWER
MODE
OSCILLATE
TIMER
TEMP +
TEMP -
POWER
MODE
OSCILLATE
TIMER
TEMP +
TEMP -
POWER
MODE
