© 2021 RVM Australia Pty Ltd. All Rights Reserved
5
STICK MIXER OPERATION
1.
Before
fir
st use, the blender blade, whisk and beaker accessories must be cleaned.
Wash the accessories with warm water and mild detergent. Rinse with fresh
water and dry thoroughly. Your stick mixer is now ready for use.
2.
Ensure unit is unplugged from wall power outlet.
3.
Insert required attachment into stick mixer body until it locks.
4.
Ensuring your
fingers
are not pressing either of the buttons on the front of the
unit, plug the power cord into the power outlet and switch on.
5.
Add ingredients into the beaker or other approved mixing container.
6.
Set speed to 1 on the stick mixer using the variable speed dial on the top of the
unit. It is recommended to start all processing at a low speed and increase the
speed during the processing. Insert the stick mixer accessory into the beaker or
mixing container and press the “I” button to start the stick mixer at the variable
speed or alternatively, use the “II” button to operate the unit at max speed.
7.
After use, unplug from the wall power outlet.
8.
Press the easy release buttons either side of the stick mixer body simultaneously
to release attachment.
and ensure the appliance is turned off and unplugged whilst
fi
tting attachments.
WARNING
The stick mixer
blades are very sharp, avoid touching them and
handle with care.
WARNING
Do not plug the appliance into mains before it is fully assembled.
WARNING
Exercise caution when removing the attachments from the stick mixer
NOTE:
All stick mixers are designed to operate only when the power buttons remain
depressed.
