10
INSTALLATION
INSTALLING YOUR APPLIANCE (CONTINUED)
Applying the seal
•
Clean the worktop around the cut-out area.
•
Stick the single-sided adhesive sealing tape provided
around the outside edge of the underside of the hob,
ensuring that it is not stretched. The 2 ends of the
tape should join in the middle of one side. Allow
the tape to overlap by 2-3mm, trim, and press the
2 ends together.
1
2
Assemble spring clips as shown, to support unit in
benchtop.
1
2
50mm
H*
The cooktop must be installed at least 50mm from any
combustible surface.
H* - refer to rangehood manufacturers installation
instructions for minimum height from cooktop.
Summary of Contents for WHC322BA
Page 1: ...USER MANUAL WHC642BA WHC742BA WHC644SA WHC942BA WHC322BA CERAMIC HOBS...
Page 11: ...11 INSTALLATION 490 1mm 560 1mm 600mm R5mm WHC642BA WHC644SA WHC742BA...
Page 12: ...12 INSTALLATION 490 1mm 880 1mm 600mm R5mm WHC942BA INSTALLING YOUR APPLIANCE CONTINUED...
Page 13: ...13 INSTALLATION 600mm 300mm 490mm 75mm R5mm WHC322BA...