manualshive.com logo in svg

Westinghouse Westinghouse 540 upright cooker, User Manual

Share
Download
Westinghouse Westinghouse 540 upright cooker User Manual Download Page 20

20

SERvICE

SERvICE fUSE & OvEN LIGHT REPLACEMENT

SERvICE fUSE LOCATION – MOdELS WITH POWER POINT ONLy

This product is fitted with a Power Outlet at each end of the 

Control Panel. 

The Outlets are protected by a replaceable 15 Amp Fuse 

located at the rear of the product. 

WARNING

 

Before servicing the Fuse, ensure that all Power 

to the product is switched off. To access fuse, unscrew 

fuse housing and remove from appliance 

(see diagram).

7

Fuse

Fuse Housing

REMOvING THE OvEN LIGHT GLASS

Switch the oven off before removing the oven light glass.
Turn Oven Light Glass anticlockwise to remove it for globe 

replacement, if necessary use a tea towel, etc for extra grip.

WARNING

 

WARNING

Ensure the appliance is switched off before replacing 

the lamp to avoid the possibility of electric shock.

When replacing the Light Bulb ensure the replacement is 

suitable for high temperatures. We recommend using a 

genuine replacement available from Electrolux Spare Parts.

Turn light anti-clockwise 

to remove it for globe

Globe Specifications: 

25W (maximum)/230 – 240V 

Temperature Rating 300°C 

Edison Screw, small (E14)

Summary of Contents for Westinghouse 540 upright cooker



































Reviews:

No comments

Brands by name

Popular brands

Load more brands