Westinghouse WBE5100SC User Manual Download Page 10

18

19

ELECTRONIC CONTROLS

Freezer temperature alarm

If the alarm sounds for no apparent 

reason, check whether anything is 

keeping the door open. If the freezer 

becomes too warm due to the freezer door being left open 

or warm food being placed too close to the temperature 

sensor, a buzzer will sound.

The icon adjacent to the alarm reset button, the freezer set 

temperature and bar graph will all flash, until the alarm 

reset button is pressed. Once pressed, the alarm disable 

icon adjacent to the alarm button will illuminate for 50 

minutes, or until the temperature drops to an acceptable 

level. 

Make sure nothing is holding the freezer door open and 

move any warm food away from the temperature sensor. If 

the freezer is still too warm after 50 minutes, the alarm will 

sound again, indicating that something may be wrong with 

the refrigerator.

NOTE:

The freezer temperature alarm can be reset for 12 hours by 

pressing the alarm reset button continuously for 10 seconds.

Door alarm

If the fridge door is left open for more 

than two minutes, the alarm will buzz and 

an arrow pointing to an open door will flash, along with 

the temperature setting and bar graph.

If you want to leave the door open while you load the 

refrigerator, you can turn the alarm off for 8 minutes by 

pressing the alarm reset button.

CHILD LOCK

Press and hold the 

freezer and fridge buttons 

together to activate 

the child lock. This will 

disable the display to 

prevent accidental changes to settings. 

To turn the child lock off, press and hold 

the freezer and fridge buttons together.

Drinks chill timer

The drinks chill timer is used to quickly 

chill a bottle. Place the bottle in the 

freezer and the timer can be set for a 

minimum of 5 minutes to a maximum of 30 minutes. To set, 

simply press the drinks chill button repeatedly for the number 

of minutes (in 5-minute intervals). Once set, an animated 

icon appears beside the drinks chill button, with a timer that 

counts down one minute at a time. 

You can change the time or turn the timer off even after the 

countdown has started. A buzzer will tell you when the time 

is finished and the icon will flash until the alarm reset button 

is pressed.

If your drink is not cold enough, reset the drinks chill 

function (remembering the drink is already partially chilled).

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

The LCD panel has a blue 

backlight and 6 touch 

buttons. It also contains an 

infrared light sensor, which 

turns the lights in the fresh 

food section on and off. 

When the power is first 

turned on, you will see the 

default settings, with the 

backlighting on.

Controlling the temperature

The default temperature for the refrigerator is 3°C 

and -18°C for the freezer. If you want to change the 

temperature, follow the instructions below. Make only 

small adjustments and wait 24 hours to see if it’s correct. 

Checking the softness of ice cream is a good indication 

if your freezer is the right temperature, while checking the 

temperature of water kept in the refrigerator is a good way 

of checking the temperature of the food compartment.

NOTE:

When you set a temperature, you set an average 

temperature for the whole refrigerator cabinet. Temperatures 

inside each compartment may vary, depending on how 

much food you store and where you place it. High or low 

room temperature may also affect the actual temperature 

inside the refrigerator.

Changing the freezer temperature

Press the freezer button to make the 

freezer colder in 1°C steps. Once the 

maximum of -23°C is reached, the 

display will return to -14°C with the next 

press of the button. The bar graph gets smaller with colder 

freezer settings.

Changing the refrigerator temperature

Press the fridge button to make the 

refrigerator colder in 1°C steps. Once 

0°C is reached, the display will return to 

7°C with the next button press. The bar graph gets smaller 

with colder refrigerator settings.

Quick freeze function

Use the quick freeze function when 

you add a large amount of food to the 

freezer compartment. This freezes the food quickly but does 

not affect the temperature in the refrigerator compartment.

To use this function, press the quick freeze button once. An 

animated icon will light up. The quick freeze function will 

now operate for 90 minutes. If you want to turn the quick 

freeze function off before 90 minutes have passed, simply 

press the quick freeze button again. The icon will disappear 

and the freezer will return to normal operation.

ELECTRONIC DISPLAY CONTROLS – ELECTRONIC MODELS

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

ELECTRONIC CONTROLS

NOTE:

Opening the freezer door won’t effect the operation of

either Eco or Holiday modes.

Eco and Holiday Modes minimise defrosting to save 

energy, while maintaining your temperature settings.

Suggested chilling times:

 

• 10 minutes for cans of drink

 

• 20 minutes for bottles of wine

 

• 30 minutes for bottles of soft drink.

CAUTION

Care should be taken to ensure bottles are not left in freezer 

for longer periods as freezing and breakage could occur.

Energy efficiency

Your refrigerator has been designed to be energy-efficient 

and can operate in three modes: Normal, Eco and 

Holiday.

Normal mode

Normal mode is used when the 

refrigerator door is often opened. It’s the 

default mode of your refrigerator.

Eco mode

Eco mode can be used if you don’t open 

your refrigerator door a lot. It is activated

in one of two ways: 

–  by manually pressing the eco/holiday button once when 

in normal mode, or, 

–  by automatically activates after 30 hours if the refrigerator 

door has not been opened. 

The leaf icon will appear on the electronic display when 

eco mode is on. If eco mode is activated automatically, the 

refrigerator will revert to normal mode once the refrigerator 

door is opened.

If eco mode is entered manually, opening the door will not 

revert it back to normal mode. To exit eco mode, simply 

press the eco/holiday button until the word “normal” is 

displayed.

Use Eco mode when you’re not using the refrigerator all 

the time (eg. as a long-term storage refrigerator). If the door 

is going to be opened a lot, switch back to normal mode.

Remember, if eco mode is turned on manually, it won’t 

switch off automatically.

Holiday mod

e

Use this button when you go on holiday 

or leave the house for long periods. 

The refrigerator minimises defrosting to save energy but 

maintains your temperature settings. To put the refrigerator 

into holiday mode, press the eco/holiday mode button 

until the aeroplane icon appears. The holiday mode will 

operate until the button is pressed again or the refrigerator 

door is opened.

sensor

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

sensor

eco

alarm

reset

drinks

chill

freezer

quick

freeze

eco/

holiday

fridge

sensor

holiday

Summary of Contents for WBE5100SC
















Reviews: