Westinghouse W-350 Owner'S Manual Download Page 2

2

ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE

NOTE:

Carefully unpack fixture and parts.  Make sure all parts are included before 

discarding any packing materials (see figure 1).

WARRANTY INFORMATION

This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for

a period of Five Years from purchase date.  This warranty is in lieu of all other

warranties expressed or implied.
This warranty does not cover acts of nature such as lightning damage, or corrosion and 

discoloration of components, nor does it cover damages caused through abuse, improper

installation, surges in electric current, or acts of third parties.

This warranty does not cover costs of removing and re-installing the light fixture.
If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of

the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or

replace the fixture or refund the purchase price.

WARNING:  ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

Read and follow instructions exactly as shown.  If instructions are unclear,
do not 
proceed.  Contact a qualified electrician.  Read all instructions
before beginning.  Proper wiring is essential for safe operation of this fix-
ture.  When cutting or drilling into walls or ceilings, do not damage electri-
cal wiring, gas lines, or water lines.  If any of the fixture or wiring compo-
nents are damaged, do not install fixture.  Return to place of purchase.

For fixtures provided with 75° C or 90° C supply wire warning only. (These
warnings are provided on the U.L. label and on the fixture carton.)  Risk of
fire.  Most dwellings built before 1985 have supply wires rated 60° C.
Consult a qualified electrician before installing.

NOTE: For fixture employing a grounded convenience outlet.  This fixture
employs a grounded type receptacle and is not intended for connection to
a two wire ungrounded source of supply.

Applicable only to portable lamps:
To reduce the risk of electrical shock, all portable lamps have a polarized
plug (one blade is wider than the other). This plug will fit into a polarized
outlet only one way. If plug does not fit, reverse the plug. If it still does not
fit, contact a qualified electrician. Never use with an extension cord unless
plug can be fully plugged into the extension cord. Do not alter the plug.

Congratulations on your Westinghouse purchase.  This fixture has been designed to give you many 

years of beauty and service.  For questions and comments, please visit www.westinghouselighting.

com/contact-us.

Summary of Contents for W-350













Reviews: