7
5
STORGE
Before storing your vacuum cleaner the tank should be emptied and cleaned. The
power cord can be wound around the housing of the unit for convenience. Cleaner
should be stored indoors.
OPERATION
1. Slide foam filter over lide cage (Picture 6).
2. Slide cloth filter over foam filter (Picture 7).
3. If you use your vacuum to pick up dust when the filter is wet, the filter will clog
quickly and be very difficult to clean.
4. Attach power head to the tank and your vacuum is ready to use.
WET PICK-UP
1. Remove cloth filter and only use foam filter to pick up liquids.
2. If misting occurs, empty the tank and allow the filter to dry before continuing use.
3. When finished vacuuming, raise the hose to drain excess liquid into the tank. Interior
of the tank should be cleaned periodically.
4. After using, the foam filter must be dried to reduce the risk of mildew and damage to
the filter.
DRY PICK-UP
EMPTYING LIQUID WASTE FROM TANK
WARNING
TO REDUCE THE RISK OF INJURY, UNPLUG POWER CORD
BEFORE EMPTING THE TANK.
1.Remove power head and pour contents from the tank.
WARNING
TO REDUCE THE RISK OF BACK INJURY OR FALLS, DO NOT
VACUUM IF ITS CONTENTS ARE TOO HEAVY. SCOOP OR DRAIN
ENOUGH OUT TO MAKE THE VACUUM LIGHT ENOUGH TO
LIFT COMFORTABLY.
PARA REDUCIR EL RIESGO DE LESIONES CAUSADAS POR MOVER LAS PARTES Y/O
DESCARGA ELÉCTRICA, APAGUE EL INTERRUPTOR DE ENERGÍA Y DESCONECTE
EL ENCHUFE A TIERRA DESDE LA SALIDA ELÉCTRICA ANTES DE REALIZAR LAS
COMPROBACIONES DE SOLUCIÓN DE PROBLEMAS. Los problemas de menor
importancia a menudo pueden ser fijos sin llamar servicio de cliente de agente.
REPARACIÓN DE AVERÍAS
Limpiar o sustituir el filtro
Pérdida de recogida seca de la succión
La manguera está obstruída
Drenar y limpiar el tanque
La manguera está obstruída
Limpiar o sustituir el filtro
Pérdida de succión de recogida mojada
Drenar y limpiar el tanque
El tanque está lleno
PROBLEMA
CAUSA
Retirar la manguera y limpiar los deshechos
El filtro está obstruído
Retirar la manguera y limpiar los deshechos
El filtro está obstruído
La aspiradora no funciona
Falta luz
Asegurarse de que la salida eléctrica lleve tension(Hará falta
contactar un electricista calificado)
El tanque está lleno
SOLUCIÓN