3
WST1800 Automatic Vacuuming Dust Bin
3. Turn Control Dial to the MAN position for
manual operation or to the AUTO position for
automated use. The Status Indicator Light will
illuminate when the Control Dial is in either of
these positions.
Your SweepEZE™ is now ready for use.
BEFORE USING FOR THE FIRST TIME
1. Remove SweepEZE™ from packaging and
set upright on any non-carpeted flooring.
Remove packing tape from Micro Exhaust
Filter on the side of the unit.
2. Plug unit into any standard 120V AC
electrical outlet.
4. Use the Manual Activation Button to
begin vacuuming in either the MANUAL
or AUTO Modes.
5. As dirt and debris accumulate, the
Collection Bin Fill Level Window will
allow you to see when the Collection
Bin needs to be emptied and cleaned.
NOTE: SweepEZE™ cannot operate when the
Control Dial is in the OFF position.
1. Turn the Control Dial to the MAN position
for manual operation or to the AUTO
position for automated use. The Status
Indicator Light will illuminate when the
Control Dial is in either of these positions.
2. In the MANUAL Mode, sweep debris
towards the Inlet at the Base of the unit,
press the Manual Activation Button and let
SweepEZE™ vacuum the debris through the
Inlet and into the Collection Bin.
3. When the Control Dial is turned to the AUTO
position, sweep debris towards the Inlet at
the Base of the unit and the Eye-Vac™
Sensors will detect the debris and
automatically initiate a timed vacuuming
cycle which will terminate 5 seconds after
the Eye-Vac™ Sensors no longer detect
debris. SweepEZE™ will vacuum the debris
through the Inlet and into the Collection Bin
without you ever having to bend over or
touch the dirt.
OPERATING INSTRUCTIONS
