Page 12
Reversing the Door Opening Direction
appliance, are 2 screws which need to be removed and re-inserted into the corresponding
holes on the right of the top of the appliance.
/
While supporting the refrigerator compartment door, remove the 2 screws securing the centre
hinge to the cabinet.
/
Remove the hinge , the plastic washer on the top pin and the plastic gasket behind the hinge
and carefully put the door aside.
/
In the front of the
on top
of the freezer compartment there
are
/
/
/
/
/
/
/
/
panel
2 rectangular plugs . Use a
flat blade screwdriver as a lever
to remove them.
Use a phillips head screwdriver to
remove the screws that the
plugs were concealing.
There are 2 round holes to the
back of the top panel . Remove
the screws from these holes.
The top panel can now be
removed.
Hold the freezer door in the
closed position while removing
the 3 screws that secure the
top hinge .
The freezer door can now be
lifted off, along with the top hinge.
Remove the top hinge pin from
the hole in the top of the freezer
door.
Now unscrew the hinge pin
from the hinge . Turn the hinge
over and screw the pin in from
the other side of the hinge .
On the left of the top of the
Precautions:
/
Turn off the appliance.
/
Unplug the power cable.
/
Remove all food from the
appliance.
/
Remove shelves and baskets.
/
Do not lay the appliance down
flat on its back or sides. This will
impair its operation.
/
When tilting the appliance to access
the underside, support it so that it
will not fall to the floor.
In this example, the operation is reversed from right side hinging to left side hinging.
NOTE: All parts removed must be
retained to reinstall the door.
Ensure all washers are
reassembled in original order.
Fig. 1 shows right side hinging assembly.
fig. 1
Instructions:
,
Summary of Contents for RJ182T
Page 1: ......
