BEFORE FIRST USE
Remove any sticker or protective covering from the
soleplate.
•
Unwind and straighten the electrical power cord
•
Connect the iron to a suitable main supply outlet.
The red neon indicator glows
•
Turn the Temperature dial to '•••' (3 dots) setting,
the red neon indicator glows
•
The neon indicator goes off when the required
temperature is reached
•
Iron a damp towel for removing any protective
chemical left on the soleplate. After a few minutes
the iron is ready for proper use
IRONING
•
Connect the iron to a suitable main supply outlet
•
Turn the temperature dial in clockwise direction,
select the kind of textile to be ironed against
pointer according to the recommendation of the
garment label
•
Red neon indicator glows indicating the iron is
switched on and heating up
•
When the required temperature is reached; the
neon indicator goes off
•
The iron is now ready to use
•
Switch off the iron after use
•
Disconnect the iron from the main supply outlet
when it is not in use
•
When the iron cools down completely, store it in a
safe place
HINT FOR USE
•
Sort out the clothes to be ironed according to the
type of fabric. Start ironing the articles that require
the lowest ironing temperature, such as those
made of synthetic fibres. This will minimize the
frequency of temperature adjustment for different
garments
•
Test iron with a small area on the back side or
inside of the garment if you are unsure about the
type of fabric. Silk, woolen and synthetic materials:
iron the reverse side of the fabric to prevent shiny
patches. Start with a low temperature and
increase gradually
•
Wait for about three minutes before ironing heat
sensitive fabrics. Temperature adjustment needs
certain time to reach the required level no matter
it is higher or lower
•
Delicate fabrics such as silk, wool etc. are best
ironed with an ironing cloth covering to prevent
shiny marks
CLEANING THE IRON
•
Disconnect the iron from the main supply outlet
•
Let the iron cool down to the room temperature
•
Use a damp cloth or non scratching cleaner to
remove any deposits on the soleplate
•
Never use sharp or rough objects to remove the
deposits on the soleplate
•
Never use any abrasive, vinegar or descaling
agents to clean the iron
