LCD REMOTE PAIRING
To set up the LCD remote for the first time, plug in the ground stake,
push the
“power”
button for 3 seconds. Then red LED indicator will
flash. Push “ON” button of the remote. The remote is now paired with
the receiver.
BLUETOOTH OUTDOOR DIGITAL POWER CENTER
REMOTE INSTRUCTIONS
SAFETY INFORMATION
WARNING
DISREGARDING CAUTIONS COULD CAUSE DAMAGE, FIRE, OR FATAL SHOCK.
CAUTION
CAUTION – RISK OF FIRE. NOT FOR PERMANENT INSTALLATION. USE ONLY WITH A
TOTAL OF 15 AMPERE MAXIMUM
CHRISTMAS-TREE OR OTHER SEASONAL LIGHTING PRODUCTS. DO NOT INSTALL OR
USE THIS PRODUCT FOR MORE THAN A 90-DAY PERIOD.
IF USING FOR CHRISTMAS TREES OR DECORATIVE-LIGHTING PRODUCTS THAT ARE
NOT MARKED WITH AN AMPERE RATING, DO NOT CONNECT NO MORE THAN 140
SCREW-BASE LAMPS (C7 OR C9) OR 12 STRINGS WITH LAMPS TO THIS GROUND
STAKE.
OUTDOOR CORD SETS SHOULD ALWAYS BE PLUGGED INTO A GFCI-PROTECTED
RECEPTACLE.
IF USING AN OUTDOOR CORD SET FOR AN EXTENDED PERIOD OF TIME (GREATER
THAN 90 DAYS) PLEASE CONSIDER HARD WIRING A PERMANENT OUTDOOR-USE
RECEPTACLE RATED FOR YEAR-ROUND USE IN THE AREA THAT POWER IS NEEDED.
PLEASE CONTACT A LICENSED ELECTRICIAN FOR PROPER INSTALLATION OF
PERMANENT WIRING.
AFTER COMPLETION OF INSTALLATION, THE CONNECTOR SHALL BE MAINTAINED A
MINIMUM OF 6 INCHES ABOVE GROUND.
FOR TEMPORARY OUTDOOR INSTALLATION AND USE – NOT TO EXCEED 90 DAYS.
THIS ITEM IS A PHOTOELECTRIC DEVICE AND CONTAINS A LIGHT SENSITIVE
PHOTOCELL TO TURN ON AND OFF AUTOMATICALLY. IN ORDER TO OPERATE
PROPERLY, BE SURE TO FACE THE PHOTOCELL SENSOR ON THIS DEVICE AWAY
FROM ALL NEARBY LIGHT SOURCES.