MA7200 PLUS Inverter 1 to 2 HP PID Fan and Pump Quick Start Manual
__________________________________________________________________
________________________________________________________________
TECO – Westinghouse Motor Company
3
Step 2
- Apply Power to the Drive
• Apply AC power to the Inverter and observe the LCD Display Line 1; it should read
“
Freq. Cmd 000.0
0
Hz
”. Line 2 should read “
TECO
”. The red LED on the
STOP
key should be
on
.
The
DRIVE
and
FWD
LED’s should be
on
. (See Fig. 1 below)
Step 3
- Set Drive to Run Mode
• If the red
DRIVE
LED is not on with AC power up, press the
PGRM / DRIVE
key until the red
Drive
LED is
on
. The Inverter is now in the
RUN
mode.
Step 4
- Check Fan or Pump Motor Operation
•
Enter
10.00Hz
for the frequency reference and set parameter
Sn-08 = 1
to disable Reverse
Direction Operation.
Note
:
The output from the inverter is displayed in Hz as factory default. If
desired, the output may be displayed in other units such as (%) of full speed, PSI etc. (see
Step 9)
Summary of Contents for MA7200-2001/2-N1
Page 24: ......
