background image

IMPORTANT INFORMATION

2

English

IMPORTANT INFORMATION

Warnings

To reduce the risk of fire or electric shock:

Do not expose this product to rain or moisture.

Do not remove the rear cover. There are no user-serviceable parts inside. 
Refer all servicing requirements to qualified service personnel.

The plug should be connected to a mains socket outlet with a protective 
earthing connection.

The lightning flash with arrowhead inside an equilateral 

triangle symbol is intended to alert the user to the presence 

of uninsulated dangerous voltage within the product's 

enclosure that may be of sufficient magnitude to constitute a 

risk of electric shock.

The exclamation inside an equilateral triangle symbol is intended to 

alert the user to related operating and maintenance instructions in 

the user documentation accompanying the product.

WARNING!

This device must be operated with the original power supply.

WARNING!

To prevent injuiry, this apparatus must be securely attached to the floor/wall in 

accordance with the installation instructions.

CAUTION:

The power supply outlet should be located near the LED TV and should be easily 
accessible.

Always use the appropriate AC cord that is certified for your specific country. 
Some examples are listed below:

USA  –  UL

Canada – CSA

Japan – Electric Appliance Control Act

Summary of Contents for LD-3237



































































Reviews: