14
uSINg YOuR ApplIANCE
to replace the drawer,
1 . With the telescopic slides pushed in all the way .
2 . Slide the drawer into place over the slides and push
the bin in until it stops . The bin will not be closed all the
way .
3 . Open the bin to access the finger tabs at the ends of
the telescopic slides, on each side of the bin . Using
your thumb and forefinger, lift the bin over the end of
the slide and clip in place . If the drawer is not fully
engaged on the slide, it’s possible the drawer won’t
stay on the slide if fully extended.
4 . Fully close the bin .
When replacing the drawers after cleaning, we recommend
fitting the lower drawer first .
The end of slide must
be clipped into place
SpiLLSAfE™ GLASS SHELvES (wHERE fittEd)
Spillsafe™ glass shelves
keep spills on the shelf . A
shelf retaining system
minimises accidental
movement of shelves and
they can be adjusted to
various heights . Spillsafe™
glass shelves are not to be
used as slide out shelves . To remove the shelves, gently pull
them forward until the shelf comes clear of the shelf guides .
To return the shelf, make sure there is nothing behind that
may obstruct movement . Gently push the shelf into the
cabinet and back into position .
bottLE HoLdER
The bottle holder can be
used to store various
types of bottles like wine
or beer . Bottles should be
stored with the bottom
end towards the back of the refrigerator . Selected models
are supplied with a chrome, full-width wine rack .
fREEzER dRAwERS
Freezer drawers are fitted to
bottom mount models and
single door all freezer models .
The drawers are mounted on
telescopic extension slides, to
enable full access to the content
in the drawer . Clear plastic
fronts provide easy visibility of
foods .
to remove the drawer for cleaning,
1 . Empty food from the drawer .
2. Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides . Once you have
removed the drawer, ensure the slides are pushed back
so they are fully closed .
WARNING
wARNINg
Never close the door while the telescopic slides are
extended. This may damage the slide and/or refrigerator
or cause the slide to become disengaged from the
refrigerator .
