7
Installation Guideline
The installation must be in compliance with the National Electrical Code, your local electrical and plumbing
codes.
1. Make sure the appliance is intact, and the fittings are complete.
2. Please make sure the main power supply, water pressure, grounding condition, ammeter and wire reach the
standard of installation requirement.
3. The appliance must be connected to properly grounded dedicated branch circuits of proper voltage rating.
Ground must be brought to the
“
ground
”
at the circuit breaker panel.
4. This appliance
MUST
be permanently connected to the fixed circuit breaker. If you don
’
t use the heater, please
switch off the circuit breaker.
5.
DO NOT
install this appliance near to tinder or strong magnetic field place. The unit must only be mounted in a
VERTICAL position near by the water fittings.
