Westinghouse 457-8600 Owner'S Manual Download Page 2

 2

 

Table of Contents

Table of Contents    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Safety Information   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Warranty

One Year Limited Warranty  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Warranty Claim Procedure   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

Pre-Installation

Tools/Materials Required   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Package Contents    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Hardware Included  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Planning Installation    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 7

Installation    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10
Operation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 13

 

Maintenance

Replacing Filters    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14
Replacing Lights    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14

Care and Cleaning

Range Hood   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15
Filters  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

Troubleshooting    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 16

Specifications 

Wiring Diagram    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17
External Range Hood Diagram   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18

Service Parts  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 19

Safety Information

 

READ AND SAVE THESE INSTRUCTIONS

Warning - To reduce the risk of fire, electric shock, or injury to 

persons, observe the following:

1 .  Use this unit only in the manner intended by the manufacturer . If 

you have any questions, contact the manufacturer . 

2 .  Before servicing or cleaning unit, switch power off at service 

panel and lock service disconnecting means to prevent 
power from being switched on accidentally . When the service 
disconnecting means cannot be locked, securely fasten a 
prominent warning device, such as a tag, to the service panel .

3 . 

Installation work and electrical wiring must be done by qualified 

person(s) in accordance with all applicable codes and standards, 

including fire-rated construction.

4 . 

Sufficient air is needed for proper combustion and exhausting 
of gases through the flue (chimney) of fuel burning equipment 

to prevent back drafting . Follow the heating equipment 
manufacturer’s guideline and safety standards such as those 
published by the National Fire Protection Association (NFPA), 
and the American Society for Heating, Refrigeration and Air 
Conditioning Engineers (ASHRAE), and the local code authorities .

5 .  When cutting or drilling into a wall or ceiling, do not damage 

electrical wiring and other hidden utilities .

6 .  Ducted fans must always be vented to the outdoors .

DANGER:

 

Turn off the power circuit breaker or the power 

switch on the junction box before installing or servicing 
this unit . Touching circuitry inside the range hood while it is 
energized will result in death or serious injury .

DANGER:

 

All electrical wiring must be properly installed, 

insulated, and grounded . Improper insulation and grounding 
will result in deadly electrical shock .

DANGER:

 

If installing this unit over a gas range, turn off 

the gas at the source before installing or servicing this unit .

WARNING:

 

Attempting to install or service this unit when 

you do not have the necessary technical or electrical 
background could result in personal injury .

WARNING:

 

The unit has sharp edges . Always wear safety 

gloves during installation, cleaning, or servicing .

WARNING:

 

Always leave safety grills and filters in place. 

Without these components, operating fans could catch on to 

hair, fingers, or loose clothing.

WARNING:

 

Stay clear of the rotating fan when the motor 

is running . 

WARNING:

 

Keep this appliance clean and free of grease 

and residue build-up at all times to prevent fires.

CAUTION:

 

This device is for general ventilating use only . 

Do not use to exhaust hazardous or explosive materials and 
vapors .

 

Summary of Contents for 457-8600





















Reviews: