Westinghouse 28499, Instructions, Page: 2 / 4

TIME
RESET
ON/OFF/AUTO MODE PROG
PAIRING
WARNING
INSTRUCTIONS
DISPLAY EXPLALANATION
ON Continuously ON
OFF Continuously OFF
AUTO Timer will turn ON/OFF according
to program settings
DISPLAY EXPLALANATION
d Dusk to Dawn - On at sundown, Off
at sunrise
d:01 to d:12 On at Dusk, Off 1 to 12 hours later
S:01 to S:12 On immediately, Off 1 to 12 hours later
ON OFF
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
INITIAL USE : Before initial use, please plug in your timer for
at least 1 hour to charge the internal battery. After the LCD
display appears, your unit will be ready for programming.
RESET
: Press the “+” and “-” buttons at the same time to
reset your timer. This will clear all programmed settings.
SET CURRENT TIME
1. Press and hold the “TIME” button to enter the current
time. First, set the day of the week: press “+” or “-”
button to set today’s day.
2. Press the “TIME” button to enter the hour setting.
Press the “+” or “-” buttons to set the current hour.
Be sure that AM or PM appears correctly.
3. Press the “TIME” button to enter the minute setting,
Press the “+” or “-” buttons to set the current minute.
4. Press the “TIME” button to finish setting the current
time and return to normal display.
SET MODE : Press & hold the “MODE” button to scroll
between the different mode settings:
SET PROGRAM : After choosing your mode, set the timer
program by holding the “PROG” button for 3 seconds, and
then follow the appropriate section below.
SET PROGRAM: DIGITAL TIMER
1. Set the desired day of the week setting for your timer
using the “+” or “-” button to scroll between choices.
You can select each day individually, Monday to Friday,
Saturday/Sunday, or the entire week. To have your timer
turn On/Off at the set times every day of the week, be
sure to push “+” until all 7 days of the week are lit up.
2. Press “ON/OFF/AUTO” to enter the “PROG 1 ON” hour
setting. Press the “+” or “-” to choose the desired hour
for your timer to turn ON. Be sure to cycle through until
AM or PM appears correctly.
DISPLAY MODE EXPLANATION
Digital Timer ON/OFF at your exact
programmed times
Photocell
Countdown
Timer ON at Dusk or ON immediately,
OFF after 1-12 hours
Digital Timer +
Photocell ON at dusk, OFF at your exact
programmed times
3. Press “ON/OFF/AUTO” to enter the “PROG 1 ON” minute
setting. Press the “+” or “-” to choose the desired minute
for your timer to go on.
4. Press the “PROG” button to enter the “PROG 1 OFF”
setting. Repeat steps 2 & 3 to set your desired Off time.
5. You may now either press the “PROG” button to enter
additional programs, or press the “TIME” button (or wait
15 seconds) to store your program. Your timer will now
show the current set time and is ready for use.
SET PROGRAM: PHOTOCELL COUNTDOWN TIMER
1. Set the desired day of the week program by pressing the
“+” or “-” buttons. You can select each day individually,
Monday to Friday, Saturday/Sunday, or an entire week.
To have your timer turn ON and dusk OFF at the set time
every day of the week, be sure to push “+” until all 7 days
of the week are lit up.
2. Press “ON/OFF/AUTO” to enter the hour setting. Press
the “+” or “-” to set:
3. You may now either press the “PROG” button to enter
additional programs, or press the “TIME” button (or wait
15 seconds) to store your program. Your timer will now
show the current set time and is ready for use.
SET PROGRAM: DIGITAL TIMER + PHOTOCELL
1. Set the desired day of the week program by pressing the
“+” or “-” buttons. You can select each day individually,
Monday to Friday, Saturday/Sunday, or an entire week.
To have your timer turn ON at dusk and OFF at the set
time every day of the week, be sure to push “+” until all 7
days of the week are lit up.
2. Press the “ON/OFF/AUTO” button to enter the “OFF”
time hour setting. Press the “+” or “-” to set. Be sure to
cycle through until AM or PM appears correctly.
3. Press the “ON/OFF/AUTO” button to enter the “OFF”
time minute setting. Press the “+” or “-” to set.
4. You may now either press the “PROG” button to enter
additional programs, or press the “TIME” button (or wait
15 seconds) to store your program. Your timer will now
show the current set time and be ready for use.
MANUAL ON/OFF REMOTE OVERRIDE : You can manually
override your set programs and turn your devices on/off
with the included wireless hand-held remote. Simply press
the ON/OFF buttons on the remote for instant control. The
timer will stay on or off until the next program setting.
MANUAL OVERRIDE : Press the “ON/OFF/AUTO” button to
choose the timer status:
PAIRING: TO PAIR TRI-MODE TIMER WITH REMOTE
1. Press and hold “On/Off/Auto”+”PROG” Button for 3
seconds simultaneously
2. “PAr” will flash continuously on the screen.
3. Press “On” button with the transmitter and “PAr” will
disappear.
4. This Tri-mode timer is now paired with your remote
Remark: When you reset the timer, you have to pair the
remote once again.