HINTS AND TIPS
• The rechargeable battery in the timer should be charged first by plugging it into a regular household outlet
(125V) for ten minutes.
• Ensure the “ON/OFF” switch on your appliance or light is in the “ON” position when connected to the timer.
• Do not expose the timer to extremely high or low temperatures. Do not place in direct sunlight.
• This Outdoor Digital Timer is weatherproof .
• Display is clearer when viewed from above.
• To fast forward, press and hold the “h+”, “m+” or “Day” button.
• Check your programmed times by pressing the “Timer” button (up to 12 commands available).
• Ensure the hour has been set correctly to AM or PM, indicated either by A or P.
• For any given day and time, if one program is set to ON, and another program OFF, Outdoor Digital Timer will
turn your appliance/light OFF.
• Return to the clock function by pressing the “Time” button.
Here below, are step-by-step instructions for setting your timer in two different examples:
ExAMPLE A
To switch an appliance or light
ON
every day of the
week at 8:10 pm and
Off
at 11:06 pm, follow the steps
below:
1. Press the
Timer
button
once to show:
2. Press the
h+
button
until 8:-- pm appears.
Note that the small P
at the bottom right of
display window shows
PM.
3. Press the
m+
button
until 8:10 pm appears.
4. Press the
Timer
button
again to set the OFF
time, the display will
now show:
5. Press the
h+
button
until 11:00 pm appears:
6. Press the
m+
button
until 11:06 pm appears:
Your timer is now set to go
ON
every day of the week
at 8:10 pm and
Off
at 11:06 pm.
MO TU WE TH FR SA SU
TIMER
ON
MO TU WE TH FR SA SU
TIMER
OFF
TIMER
ON
P
MO TU WE TH FR SA SU
MO TU WE TH FR SA SU
TIMER
OFF
P
MO TU WE TH FR SA SU
TIMER
OFF
P
TIMER
ON
P
MO TU WE TH FR SA SU
ExAMPLE B
To switch an appliance or light
ON
at 1:30 pm Saturday
and
Off
at 7:15 am Monday, follow the steps below.
(Let’s assume you have already set Timer Program 1,
and now want to set another).
1. Press the
Timer
button until program
2 appears. This is
the next available
ON
program:
2. Repeatedly press the
Day
button until only
SA
(Saturday) appears
3. Press the
h+
button
until 1:-- pm appears.
4. Press the
m+
button
until 1:30 pm appears:
5. Press the
Timer
button
again to set the OFF
time; the display will
now show:
6. Repeatedly press the
Day
button until only
MO
(Monday) appears:
7. Press the
h+
button
until 7:-- am appears:
8. Press
m+
button until
7:15 am appears:
Your timer is now set to go
ON
at 1:30 pm Saturday
and
Off
at 7:15 am Monday.
MO TU WE TH FR SA SU
TIMER
ON
SA
TIMER
ON
SA
TIMER
ON
P
SA
TIMER
ON
P
MO TU WE TH FR SA SU
TIMER
OFF
MO
TIMER
OFF
MO
TIMER
OFF
A
MO
TIMER
OFF
A
and
WESTINGHOUSE
are trademarks of Westinghouse Electric Corporation. Used under license. All rights reserved.
Manufactured and distributed by: The NCC, Brooklyn, NY 11220 • www.thencc.com • © 2014 The NCC
Made in China
SAVE THESE INSTRUCTIONS!
Customer Service Assistance: Toll Free 1-855-350-6868
Hours of Operation – 10AM to 6PM, EST, Monday - Friday
BUTTON fUNCTIONS
Time
–Set and display present day and time.
Timer
–Set/view 6 “ON /OFF”programs .
Day
–Set day(s). See eleven different settings
below [Hold for fast forward].
h+
– Set hours. [Hold for fast forward]
m+
– Set minutes. [Hold for fast forward]
Override
–Manual “ON/OFF”. When this button
is pressed it will change the current state from
“OFF” to “ON” or vice versa. When the next
programmed time is reached the timer will revert
to the program’s control.
Also in case of overload, this button is used to
re-activate the timer.
Reset
–Clear all settings.
TIMER BUTTON
The first press of the
Timer
button displays the
ON
settings for the 1st program, the second
press– its
Off
settings. The third press displays
the
ON
settings for the 2nd program, and so on
to the twelfth press of the
Timer
button, which
displays the
Off
settings for the 6th program.
You don’t need to use all six
ON/Off
programs.
DAY BUTTON SETTINgS
fOR TIMER MODE
1. MO TU WE TH fR SA SU
–
Daily ON/OFF settings will repeat every day.
2. MO
will only operate Monday.
3. TU
will only operate Tuesday.
4. WE
will only operate Wednesday.
5. TH
will only operate Thursday.
6. fR
will only operate Friday.
7. SA
will only operate Saturday.
8. SU
will only operate Sunday.
9. MO TU WE TH fR
–
Weekday will operate Monday to Friday.
10. SA SU
–
Weekend will operate Saturday and Sunday.
11. MO TU WE TH fR SA
–
6 Day will operate Monday to Saturday.
RESETTINg OVERLOADED TIMER
If the
Power LED
is OFF and the
Overload LED
is ON, an overload has occurred. The timer
automatically shuts power down to the plugged-
in components in order to prevent damage and/
or other dangerous events such as explosion
or fire. (Current time and program(s) settings
will not be affected by the overload shutdown of
plugged-in devices.)
In order to
re-activate
the overloaded timer:
1. You must remove the excess plugged-in
components; otherwise, the overload and
power shut-down will repeat.
2. After allowing the timer’s temperature to cool
down (~15 min.), press the
Override
button.
