3
P.N.: 75-0115-RevA
ECO #: W14-0030
Westin Automotive Products, Inc.
320 Covina Blvd
San Dimas, Ca. 91773
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service (800) 793-7846
www.westinautomotive.com
DATE: 04/15/2014
Figure. 7
Boot scraper (OPTIONAL)
can be installed anywher e on the under side fr ont edge of the r unning boar d. Place the boot
scraper (item 5) on the underside of the running board rail. Then mark the position that it will be installed using a transfer punch.
Remove the boot scraper; then using a 5/16” drill bit align it with the previously made marks and drill through the bottom of the rail
on the running board. Thread in (2x) 9.5mm hex head self taping screws. Remove the screws and add some silicone sealant in the
holes to prevent rust. Attach the boot scraper (item 5) using (2x) 9.5mm Hex Flange Head Self Threading Screw (item 13) and (2x)
9.5mm external toothed lock washers (item 12). (Figure 8 ) Torque all M9.5 hardware to 18 ft. lbs.
12
13
Figure. 8
Installation complete
