background image

 

 

 

 

 

 

8   

Westin Automotive Products, Inc. 

320 W. Covina Blvd 

San Dimas, Ca. 91773 

Thank you for choosing Westin products 

for additional installation assistance please call 

Customer Service (800) 793-7846 

www.westinautomotive.com 

P.N.: 75-588108-RevA 

ECO #: W19-0084 

DATE: 4/01/2020 

WARNING

 

Failure to follow these instructions could lead to death, personal injury, and / or property damage. 

 

 

FASTENERS: 
All Westin supplied fasteners must be utilized and installed in accordance with the installation in-
structions and apply torque to the specifications as defined.    DOUBLE CHECK ALL FASTENERS 
BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION 
AND SAFETY. 
 
DRILLING: 
Most Westin products do not require drilling for installation.  If drilling is defined as required, use 
caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN 
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE. 
 
EYE PROTECTION: 
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO 
AVOID PERSONAL INJURY. 

 

MAXIMUM TOWING/CARRYING CAPACITY: (if applicable) 
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product. 
User should never exceed the vehicle manufacturers maximum tow and weight rating regardless 
of the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN 
WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL 
AS VEHICLE DAMAGE. 
 
FOR CALIFORNIA RESIDENTS ONLY-PROP 65 WARNING: 
Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or 
other reproductive harm. For more info go to www.p65warnings.ca.gov 

Summary of Contents for 58-81085









Reviews: