3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.
75-5841175
-RevA
ECO #: W18-0220
DATE: 02/25/19
3. Next, remove the plastic lower air dam from the bottom of the bumper,
(Figure 3)
. Remove the outer bumper supports at-
taching the outer ends of the bumper to the sides of the frame,
(Figure 4)
. Remove the plastic covers from the tow hooks to
uncover the bumper bolts,
(Figure 5)
.
Fig 3
Fig 4
Fig 5
4.
Place blocks or jack stands under the front bumper to support it during mounting bolt removal. Once the bumper has been
safely supported, remove the (8) factory bumper bolts,
(Figure 6)
.
WARNING!
Assistance is required to hold the bumper in place during bolt removal to prevent the bumper from fal-
ling. Carefully slide the bumper off over the tow hooks.
Fig 6
5. Remove the passenger/right side tow hook from the end of the frame,
(Figure 7)
. Next, remove the (4) factory hex nuts,
lower frame extension and double bolt plates from the end of the frame,
(Figures 2 & 7)
. Repeat for Driver Side.
Fig 7
