1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3
2
FRONT BRACKET
4
2
CENTER BRACKET
5,6
2
REAR BRACKET, PASSENGER (5) AND DRIVER (6)
7
12
3/8-16 X 1.00” BUTTON HEAD BOLT
8
12
3/8” INTERNAL TOOTH LOCK WASHER
9
12
M8-1.25 X 30MM HEX HEAD BOLT
10
12
3/8” FLAT WASHER
11
12
3/8” LOCK WASHER
QTY
CONTENTS - CONTENIDO - CONTENU
TOOLS - HERRAMIENTA
- OUTILS
ITEM
AUTOMOTIVE PRODUCTS, INC.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
75-0876 REVISION E 11/8/07
1,2
2
ESTRIBOS,
ACOMPAÑANTE
Y
CONDUCTOR
3
2
SOPORTES
4
2
SOPORTES
, ACOMPAÑANTE
Y CONDUCTOR
7
12
PERNOS TERMINALES DE 3/8 -16 x 1”
8
12
ARANDELAS DE PRESIÓN DE DENTADO INTERIOR DE 3/8”
9
12
10
12
ARANDELAS PLANAS DE
11
12
ARANDELAS DE PRESIÓN DE
(1)
(2)
CENTRAL
5,6
2
(5)
(6)
3/8”
3/8”
DELANTERAS
SOPORTE TRASERAS
PERNOS CON CABEZA HEXAGONAL M8-1,25 X 30MM
(1)
CONDUCTEUR (2)
(5)
CONDUCTEUR (6)
RONDELLE PLATE 3/8 PO
11
12
RONDELLE A FREIN DE 3/8 PO
1,2
2
MARCHE-PIEDS, PASSAGER
ET
3
2
SUPPORT AVANT
4
2
SUPPORT CENTRAL
5,6
2
SUPPORT ARRIERE, PASSAGER
ET
7
12
BOULON A TETE RONDE DE 3/8-16 X 1,00 PO
8
12
RONDELLE A FREIN A DENTS INTERIEURES DE 3/8 PO
9
12
10
12
BOULON A TETE HEXAGONALE M8-1,25 X 30MM
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions com-
pletely before beginning.
STEP 2.
Determine front, center, and rear brackets.
STEP 3.
Attach passenger side brackets to underside of body panel using two M8-1.25 x 30mm hex head bolts, 3/8” flat
washers, and 3/8” lock washers per bracket. Hand tighten.
SEE FIGURE 1.
STEP 4.
Attach passenger side step bar to cradles with the
Westin
logo facing outward.
SEE FIGURE 2.
The step
pad closer to the bend goes to the rear of the vehicle.
STEP 5.
Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners. Recommended torque
values are 19 FT.LBS. for 3/8” and 22 FT.LBS. for 8mm bolts.
STEP 6.
Repeat installation for driver side.
WO:
DRIVER SIDE
LADO DEL CONDUCTOR
COTE CONDUCTEUR
PASSENGER SIDE
LADO DEL ACOMPAÑANTE
COTE PASSAGER
2
1
APPLICATION: 2008 TOYOTA SEQUOIA
APPLICATION: TOYOTA SEQUOIA, 2008
APLICACIÓN: TOYOTA SEQUOIA , MOD. 2008
7/32 HEX WRENCH
13MM SOCKET
13MM WRENCH
RATCHET
RATCHET EXTENSION
TORQUE WRENCH
LLAVE HEXAGONALE DE 7/32¨
DADO DE 13MM
LLAVE DE TUERCAS DE 13MM
MANERAL
MANERAL EXTENSION
LLAVE DE TORQUE
CLE HEXAGONALE 7/32 PO
DOUILLE 13MM
CLE 13MM
CLIQUET
RALLONGE DE DOUILLE
CLE DE COUPLE
3
4
5
STEP BAR ASSEMBLIES
25-3490
25-3495
26-3490
ENSAMBLES DE ESTRIBOS
ENSEMBLES DE MARCHE-PIEDS
6
