1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3
2
TOP FRONT FRAME BRACKET
4
2
BOTTOM FRONT FRAME BRACKET
5,6
2
REAR BRACKET, PASSENGER (5) AND DRIVER (6)
7
2
POLY TUBE
8
2
1/2-13 X 6.50” HEX HEAD BOLT
9
4
1/2-13 X 2.50” HEX HEAD BOLT
10
4
1/2” FLAT WASHER
11
6
1/2” LOCK WASHER
QTY
CONTENTS - CONTENIDO - CONTENU
TOOLS - HERRAMIENTA
- OUTILS
3/4” SOCKET
3/4” WRENCH
21MM SOCKET
14MM SOCKET
HAMMER
RATCHET
TORQUE WRENCH
APPLICATION: 1995-00 FORD EXPLORER 2 DOOR
1995-01 FORD EXPLORER 4 DOOR
ITEM
APLICACIÓN: FORD EXPLORER 2 PUERTAS, MOD. 1995-2000
FORD EXPLORER 4 PUERTAS, MOD. 1995-2001
APPLICATION: FORD EXPLORER 2 PORTES 1995 - 00
FORD EXPLORER 4 PORTES 1995 - 01
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
25-0760
25-0765
25-1870
25-1875
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
75-0157 REVISION D 9/9/08
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
completely before beginning.
STEP 2.
Loosen rear shackle bolt facing outside of vehicle.
CAUTION:
Do not remove.
STEP 3
.
Remove smaller shackle bolt located just above leaf spring and to the rear of shackle mount. Attach rear
bracket with bolt just removed.
NOTE:
It may be necessary to install rear step bar bolt through slot in
brackets prior to attaching to vehicle. Also, raising vehicle frame with a jack will provide more clearance
around shackle bolt if needed.
STEP 4.
Attach front top frame bracket over top edge of frame where it has clearance and slide it next to body
mount as shown.
NOTE:
2 door models, brackets may be tight against the floor. It may be necessary to
tap it over with a hammer.
STEP 5.
Position front bottom frame bracket against frame and align hole with the top frame bracket.
STEP 6.
Insert 1/2” fasteners through bottom frame bracket, poly tube and thread into top frame bracket as
shown. Leave loose.
(1)
(2)
3
2
SOPORTE SUPERIOR DELANTERO DE LA CARROCERÍA
4
2
SOPORTE INFERIOR DELANTERO DE LA CARROCERÍA
5,6
2
SOPORTE TRASERAS
(1)
(2)
7
2
TUBO DE POLIETILENO
8
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 6,50”
9
4
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 2,50”
10
4
ARANDELAS PLANAS DE 1/2”
11
6
ARANDELAS DE PRESIÓN DE 1/2”
1,2
2
ESTRIBOS, ACOMPAÑANTE
Y CONDUCTOR
, ACOMPAÑANTE
Y CONDUCTOR
1,2
2
MARCHE-PIEDS, PASSAGER
ET
3
2
SUPPORT DE CADRE AVANT SUPÉRIEUR
4
2
SUPPORT DE CADRE AVANT INFÉRIEUR
5,6
2
SUPPORTS ARRIÈRE, PASSAGER
ET
7
2
8
2
10
4
11
6
(1)
CONDUCTEUR (2)
(1)
CONDUCTEUR (2)
BOULON À TÊTE HEXAGONALE DE 1/2-13 X 6,50 PO
9
4
BOULON À TÊTE HEXAGONALE DE 1/2-13 X 1,50 PO
RONDELLE PLATE 1/2 PO
RONDELLE À FREIN DE 1/2 PO
TUBE POLY
DADO DE 3/4"
LLAVE DE TUERCAS DE 3/4"
DADO DE 21MM
DADO DE 14MM
MANERAL
LLAVE DE TORQUE
MARTILLO
DOUILLE
DOUILLE 21MM
DOUILLE 14MM
CLIQUET
ClÉ DE COUPLE
3/4 PO
CLÉ 3/4 PO
MARTEAU
WO:
4 DOOR
4 PUERTAS
4 PORTES
2 DOOR
2 PUERTAS
2 PORTES
3
4
5
7
6
