background image

 

 

 

 

 

 

4   

Westin Automotive Products, Inc. 

320 W. Covina Blvd 

San Dimas, Ca. 91773 

Thank you for choosing Westin products 

for additional installation assistance please call 

Customer Service (800) 793-7846 

www.westinautomotive.com 

P.N.: 75-3032-RevD 

ECO #: W16-0113 

DATE: 1/13/17 

Failure to follow these instructions could lead to death, personal injury, and / or property damage. 

 

 

FASTENERS: 
All Westin supplied fasteners must be utilized and installed in accordance with the installation in-
structions and apply torque to the specifications as defined.    DOUBLE CHECK ALL FASTENERS 
BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION 
AND SAFETY. 
 
DRILLING: 
Most Westin products do not require drilling for installation.  If drilling is defined as required, use 
caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN 
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE. 
 
EYE PROTECTION: 
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO 
AVOID PERSONAL INJURY. 

 

MAXIMUM TOWING/CARRYING CAPACITY: 
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product. Us-
er should never exceed the vehicle manufacturers maximum tow and weight rating regardless of 
the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN 
WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS 
VEHICLE DAMAGE. 

WARNING

 

AUTOMOTIVE PRODUCTS, INC.  

 

Summary of Contents for 21-23240

Page 1: ...AD CAP SCREW YELLOW ZINC TORQUE WRENCH 6 12 M8 FLAT WASHER YELLOW ZINC 7 12 M8 SPRING LOCK WASHER YELLOW ZINC 8 12 M10 BUTTON HEAD SOCKET CAP SCREW BLACK ZINC 9 12 M10 INTERNAL TOOTHED LOCK WASHER BLACK ZINC 10 12 M10 FLAT WASHER BLACK ZINC 11 12 M6 HEX HEAD CAP SCREW YELLOW ZINC 12 24 M6 FLAT WASHER YELLOW ZINC 13 12 M6 NYLON NUT YELLOW ZINC 14 6 PLASTIC BRACKET COVER ANTI SEIZE LUBRICANT MUST BE...

Page 2: ...tall the front mounting bracket Item 2 using 2 M8 hex head cap screws Item 5 2 M8 flat washers Item 6 and 2 M8 lock washers Item 7 See Figure 2 Do not fully tighten at this time 4 Remove the two center rocker panel factory hex head cap screws located near the rear of the drivers door and set aside See Figure 3 5 Install the center mounting bracket Item 3 using 2 M8 hex head cap screws Item 5 2 M8 ...

Page 3: ...r Figure 6 Step tube installed to bracket INSTALLATION COMPLETE Bracket covers not shown Figure 5 7 Locate 1 plastic bracket cover Item 14 and loosely secure it to the 6 brackets using the provided hardware 2 M6 hex head cap screws 4 M6 flat washers and 2 M6 nylon nuts Repeat for every bracket See Figure 5 8 Take the drivers side step bar Item 1 and place it on the mounting cradles and align the m...

Page 4: ...NCTION AND SAFETY DRILLING Most Westin products do not require drilling for installation If drilling is defined as required use caution when drilling a vehicle FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN PERSONAL INJURY AND OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE EYE PROTECTION ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO AVOID PERSONAL INJURY MAXIMUM TO...

Reviews: