background image

WESTFIRE · WF 

ONE SERIES

WESTFIRE · WF 

ONE SERIES

3

HEaLtH aNd SaFEtY PRECautIONS
Special care must be taken when installing the stove such that the requirements of the Health and Safety at Work 
Act are met.

Handling
Adequate facilities must be available for loading, unloading and site handling.

Fire Cement
Some types of fire cement are caustic and should not be allowed to come into contact with the skin.  In case of 
contact wash immediately with plenty of water.

asbestos
This stove contains no asbestos. If there is a possibility of disturbing any asbestos in the course of installation then 
please seek specialist guidance and use appropriate protective equipment.

Metal Parts
When installing or servicing this stove care should be taken to avoid the possibility of personal injury.

WEStFIRE WF ONE SERIES WOOdStOVE

WESTFIRE ONE SERIES is available in several models

ONE SERIES

ONE SERIES PEdEStaL

Height

570mm

1112mm

Width

410mm

410mm

Depth

410mm

410mm

Closed combustion fitted as standard

Yes

Yes

These instructions cover the basic principles to ensure the satisfactory installation of the WESTFIRE ONE 
SERIES wood stove, although detail may need slight modification to suit particular local site conditions.
In all cases the installation must comply with current Building Regulations, Local Authority Byelaws and 
other specifications or regulations as they affect the installation of the stove.

It should be noted that the Building Regulations requirements may be met by adopting the relevant recom-
mendations given in British Standards BS 8303, BS 6461 and BS 7566 as an alternative means to achieve an 

uk: INStaLLatION MaNuaL aNd OPERatINg INStRuCtIONS 

 

WEStFIRE WF 

ONE SERIES

 

Congratulations on your purchase of a new wood burning stove from Westfire ApS. Please read this manual 
carefully in order to ensure that you get maximum enjoyment from your new stove and to prevent any problems. 
Please note that “all local regulations, including those referring to national and European Standards, need to be 
complied with when installing this appliance”.

For further information on installing and using fireplaces and wood burning stoves, please see the relevant 
building regulations that apply to the country in which WESTFIRE WF ONE SERIES has been approved, as well as 
the relevant brochure on the correct use of wood burning stoves available from your local stove supplier or your 
Chimney sweep. 

Summary of Contents for WF ONE













Reviews: