Westfield W130-31, Operation And Assembly Manual

Page: 16 / 48

3. A
SSEMBLY
W
ESTFIELD
- G
RAIN
A
UGERS
W130 - 31’ & 36’ PTO-SD & EMD
16 30749 R0
3.3. TRACK SHOE & TRACKSTOP
1. Slide the roller track shoe onto track.
2. Attach the angle track stop to upper end of track as shown in Figure 3.2 and
3.3 using four 7/16" x 1-1/4" bolts, locknuts, and flat washers. Make certain
the flat iron washers are on top of track.
Important: Only for GHR130-36’: Track ends must align to allow track shoe to smoothly slide
over track joint. Misalignment may cause jamming.
Figure 3.2
3.
Only for GHR130-36’
: Slide track shoe along full length of track to make
certain there is no binding and that track ends are properly aligned. The
upper and lower tracks must align to allow track shoe to roll smoothly over
this joint (Figure 3.4).
A. 130-36’ B. 130-31’
Figure 3.4
Figure 3.3