W
ESTFIELD
- GULP2 H
OPPER
3. A
SSEMBLY
MKX130
AND
MKX160 M
ODELS
30962 R1
27
3.4.5. Attach the GULP2 Hopper to the Transition (130/160)
1. Raise and support the swing tube spout head on a stand about 50” high.
2. Attach the transition to the GULP2 Hopper with two 3/4” x 2” bolts and
locknuts.
3. Raise the ramp-end of the GULP2 into the air until the transition-hopper
chains can hook on the chain retainers on the transition.
4. Adjust chain positions so that the GULP2 does not drag on the ground when
moving the power swing (this will vary for different bin heights).
Note:
Ensure the hopper sits flat on the ground before driving over.
5. Ensure that the chains lock securely into the chain retainers, and release the
ramp-end of the GULP2 hopper.
Figure 3.9 Attaching the GULP2 Hopper to the Transition
Table 3.6 Attaching the GULP2 Hopper to the Transition
Number
Description
Part # (130)
Part # (160)
Quantity
1
Transition
10-21446
10-22435
1
2
GULP2 Hopper
10-21445
10-22420
1
3
3/4” X 2” bolt GR8
10-19592
10-19592
2
4
3/4” locknut
10-19601
10-19601
2
5
Transition-hopper
chain
10-21488
10-21488
2
6
Chain retainers
---
---
4
1
4
3
6
5
5
6
2
3
4
Summary of Contents for GULP2 HOPPER MKX130
