3
Safety Notes and Operation
Persons with limited physical, sensorial or mental abilities are not allowed to
use the unit, unless they are supervised and briefed for their safety by a
qualified person. The unit contains small and fragile parts; it does not belong
into the hands of children.
Before connecting a consumer, make sure the max. electrical load does not
exceed 2300 Watts.
Do not cascade the master-slave socket outlets.
Make sure the power mains voltage available in your area corresponds to the
input voltage stated on the type label.
Observe the maximum loads.
Do not use the unit outside or in wet conditions.
Do not immerse the unit in liquids if any kind.
Do not use solvents to clean the unit. Use only a dry cloth.
Do not expose the unit to extreme temperatures, strong vibration or strong
magnetic fields.
Do not disassemble the unit or attempt to repair it. The unit does not contain
customer-serviceable parts.
Before first use
Unpack the master-slave multiple socket outlet and check it for any damage in
transit. Dispose of packaging materials or store it out of reach of children. Plastic
bags etc. may become a deadly toy for children.
Operation
1. Plug the power plug into a protected socket and set the main switch (2) to the
I
position. The switch is now illuminated red.
2. Now connect the master device, with which you want to switch the slave
devices, to the master socket (7). The maximum load on the master socket is
1000 W and it requires at least 8 W of load to function.
3. The master control LED (4) may or may not light up now. If the LED has
already lighted up, turn the sensitivity knob (5) to the left with a suitable
screwdriver until the LED turns off. When the LED has turned off, turn right
until the led lights (back) up.
Please note the following safety notes to avoid malfunctions,
damage or physical injury: