17
Operation
2. If you have pressed the button START 1x and the
alarm bell appears in the top right corner, the alarm
is activated. At the preset time you will hear the
alarm sound for the duration of 30 seconds and see
the flashing alarm bell. Press any button to abort
alarm sound.
3. If you have pressed the button START 2x and the
symbol for hourly chime appears in the top right
corner, the watch will sound every hour.
4. If you have pressed the button START 3x and both
symbols appear on the right side of the display, the
alarm and the hourly chime are activated.
5. When no symbols are displayed, the alarm and the
hourly chime are deactivated.
Countdown
1. In the normal display mode press MODE 3x to switch
to countdown setting mode.
The display shows:
TMR
0:0000
.
2. Keep the button RESET pressed for some seconds
until the hour digits start flashing. If desired, press
START to set the hours.
3. Press the button MODE to set the minutes and
adjust the minutes with the button START. To con-
firm, press RESET.
4. To start resp. to stop countdown operation, press the
button START. When countdown is running down
you will see a small flashing egg timer in the top right
corner. If countdown operation runs out, you will hear
