10
Intended Use
This appliance is designed to open standard round jars with comfort and ease.
It is designed for personal use and not suitable for commercial use.
Inserting the Batteries
1.
Slide the battery compartment cover from
the housing.
2.
Place 2 batteries of the type LR6 (AA) into
the battery compartment (3). Pay attention
to the proper polarity of the batteries. The
polarity is printed inside the battery compartment. Use alkaline batteries.
3.
Slide the battery compartment cover back into place. You must feel and hear
it click into position.
Notes: Always replace both batteries at the same time. Do not mix old and new
batteries or batteries of different types. The appliance will not work if the
battery compartment cover is removed.
Using the Jar Opener
Warning! Never place your fingers in or near
to the clamping jaws when operating the
appliance.
1.
Always remove any safety packaging
externally applied to the glass jar.
2.
Once the jar has been placed on a level
and non-slip surface, place the appliance
in a central position on the lid.
3.
Push down the start button (1) for approx. 3 seconds until the internal
clamping jaws (4) have started to move. The external clamping jaws (5) will
move inwards until they have a firm hold on the glass. The internal clamping
jaws will push down firmly on the lid and rotate to open the lid.
4.
Never leave the device unattended if it is switched on. Allow the appliance to
rotate until the lid has opened.
5.
Once the lid has opened, the clamping jaws will return to their original
position and stop moving automatically.
6.
Once the appliance has switched itself off, remove it from the lid. Always
ensure that the lid has been unscrewed fully. Always hold the jar firmly in
one hand whilst removing the lid with the other.
Operation
