Westfalia LASER 2000 34 31 45 Instruction Manual Download Page 3

 

Design protected by copyright 

 

© Westfalia 07/07

 

Herbs Chopper KP-668 

Accessory for Steel Blender, Article No. 260331 

Article No. 34 31 45

ASER

2000

 

 

 

Safety Notes: 

ƒ

  Only use the herbs chopper with the blender 260331 and also observe 

the safety notes of the blender when using this accessory. 

ƒ

  Use the unit only for processing foodstuffs such as herbs. Keep all 

parts of the unit clean as they come into contact with foodstuffs. 

ƒ

  Please note: The blade is very sharp! 

Using: 

1.  Place the herbs chopper on the motor unit of the stainless steel 

blender.  

2.  Fill in the herbs only up to the MAX marking to avoid spilling. 
3.  First insert the pin of the lid into the notch of the container and turn the 

lid counter clockwise as far as it will go until the lid locks audible. 

Please note that the herbs chopper does not work, if the lid and the 
container are not closed completely. 

4.  To chop the herbs, press the lid down and use the switch setting 

M

 for 

powerful impulse movement. Turn the switch only for 1 - 2 seconds. 

Cleaning 

ƒ

  Clean the herbs chopper after each use.  

ƒ

  Always be careful when handling with the blade.  

ƒ

  Clean the herbs chopper in mild soapy water. Do not place the herbs 

chopper in the dishwasher in order not to damage the surfaces and to 
avoid the blade becoming dull. 

Instruction Manual

Reviews: